VIBRO-SEPERATORS for wet or dry separation
SHAKTI Vibro Seperator is a screening unit Vibrating in three planes along
the vertical axis. This is
accomplished by a specially designed Vibratory Motor having eccentric
weights at the top and bottom
ends of the motor shaft. The motor is mounted Vertically at the centre of
the screening assembly. on
a circular base by means of springs which allow the unit to vibrate
freely. The springs absorb the
vibrations and prevent them to be transmitted to the floor.
Multiplane vibrations of the material are
achieved by
a) Rotation of the upper weight
creates vibrations in the horizontal plane,
enabling the material
to move across the screen from the centre to the
periphery.
b) Rotation of the lower weight gives
vibrations in the vertical and tangential planes. The
relative
positions of the upper and lower weights can be
manipulated to obtain various screening patterns,
thereby achieving maximum production and
screening efficiency for a variety of products, may it
be wet or dry, fine or coarse, heavy or light
etc.
SHAKTI Vibro seperator is suitable for
a) Dry seperation - by partical shapes
b) Solid and liquid seperation- Dewatering of soild and classification
-----------------------------------------------------------------------------------------------------------------
SHAKTI Vibro Seperator has various advantages
---------------------------------------------------------------------------------------------------------------
WIDE RANGE : It can handle a wide
range of materials, heavy or light, dry or wet, coarse
or fine,
hot or cold etc. High rate of production can be achieved even with finest
powders.
MULTIPLE SEPERATION :
As many as five screens
could be mounted on one seperator achieving
six sizes.
OPTIMUM
SPACE/CAPACITY : These
seperators achieve greater production, seperation per
unit of
screening area as compared with any other screening method or device.
POLLUTION FREE/CLEAN OPERATION :
The whole operation is very
clean and pollution free
MINIMUM BLINDING
OF SCREENS :- Due to
vibrations in the vertical plane, blinding of screen is
minimised. However, for certain materials which have inherent blinding,
sticking property, special
accessories can be used to eliminate this problem.
ADOPTABILITY :
The discharge ports could
be rotated and are most adoptable to your
process needs.
LONGER SCREEN
LIFE : The screen cloth
is held taut uniformly by tension rings. This
arrangement
enables clean screening, less screen wear and longer screen life.
VIBRATION FREE
OPERATION : There is no
vibrations at the screen base. Even no flooring is
needed. You can mount it on Bins, upper floors, planks or wherever it is
most suited. You can even
mount it on castors.
LOW ON POWER AND MAINTAINENCE / HIGH ON
EFFICIENCY : The design
enables to utilise
the vibratory force generated by the motor to the optimum and very few
moving parts reduce
the maintainence to minimum.
|
