Specialising in GEARED
MOTORS, ROTARY VIBRATORS
Geared Motors, Gear Boxes,
Helical, Worm, Epicyclic type in different mountings.
ROTARY VIBRATORS
Foot,Flange, Flameproof etc.
VIBRO-SEPERATORS, BIN ACTIVATORS,Bump &
Jolt Machine
It is a common experience that most-materials stored in bins. hoppers or
silos do not easily flow
through discharge opening.. When called upon to flow. the materials tend
to plug. bridge or rat-hole
because of their inherent characteristics. environmental conditions or
undesirable surrounding
vibrations. The conventional solutions employed. viz.. electromagnetic
vibrators. air/ steam jets.
pounding on the bin body or even manual packing of material from top or
through discharge opening.
are largely inefficient. noisy and lead to intermittant and erratic
discharge of materials. The use of
above techniques results in.
* Loss of production
* Down-time on part of down-stream requirements
* Worker fatigue due to additional strenuous work and / or unpleasant
vibrator noise.
* Contamination, dusting and spillage of product
* Damage to structure due to repeated heavy pounding
* Impaired product quality and down-stream process wherever flow rates
and charging time are
important.
SHAKTI BIN ACTIVATOR ELIMINATES THESE. PROBLEMS TO ASSURE YOU POSITIVE
CONTINUOUS FLOW WITHOUT ANY OPERATIONAL HEADACHES.
SHAKTI Bin Activator provides ON DEMAND. positive. trouble Tree.
continuous discharge
from storage. of wide range of Difficult to handle materials in a variety
of densities and
particle sizes. Available in preassembled form. this bin activator is
built up of a specially profiled
discharge head which is flexibly hung from bin. The gap between the bin
and discharge head is
sealed by an elastic sleeve.
A specially engineered gyrator with matched characteristics imparts
powerful vibrations of low
amplitude and high frequency to the discharge head and hence to the
material but not the bin. The
horizontal vibratory thrust unpacks the contained material and throws it
towards discharge opening
where it falls down easily by gravity. The discharge head resolves the
horizontal thrusts into strong
vertical impulses which extend far up into main bin to cause loosening of
contained material. The
whole phenomena is silent and demands very little power and attention.
* Discharge material continuously at a uniform rate on FIRST IN, FIRST
OUT basis without
segregation.
* Material is handled gently without damaging particles.
* Bin Activator offers and advantage of headroom saving. Unlike static
bins, the activator permits
cone angle. Hence the use of bin activator results in
increased storage capacity.
* Unlike in cases where compressed air/steam jets are used to loosen the
material, use of our bin
activator does not cause product contamination, wetting
or dusting.
* Besides saving labour costs. this devic'e consumes minimum power and
hence is economical.
* It is totally reliable. rugged and safe device and is ideally suitable
for continuous day-in and
day-out operations. It operates quietly with virtually
no maintenance.
SHAKTI Bin Activator being available in preassembled form. can be
rapidly installed by
bolting/welding on to existing steel or concrete bins of any shape.
round or square. The bin
activators are available in standard sizes riqht from 300 MM
diameter to 3600 MM diameter.
The bin activators can be supplied separately or as a self
contained ready to operate integrated unit
by combining a static bin and a bin activator. This package called
as SELF DISCHARGING BIN. is
available in volumetric capacity ranging from 30 Liters to 20.000
Liters. The SELF DISCHARGING
BINS can be designed to be supported on rigid legs or suspended
from a suitable structure.
The Standard units are made of carbon steel. however 304 and 316
stainless steel can also be
considered if customer so desires. The external and internal
surfaces can be painted with enamel
paint. epoxy paint Of any other paint and colour of
customer's choice. The standard motors are of
totally enclosed and non vented type and work on 440 V. 3ǿ,
50 C/S. Here two variations in
specification can be considered in accordance with the
requirements of application. The standard
elastic sleeve is made of white food quality neoprene rubber.
Besides BIN ACTIVATORS and SELF DISCHARGiNG BINS other
products manufactured by
SHAKTI ENGINEERS are BIN UNLOADERS. FLEXIFEEDERS.
VIBRO-METERING FEEDERS.
VIBRO BLENDERS and completely integrated and automated
CONTINUOUS BLENDING SYSTEMS.
You are most welcome to try your powders and granules on
our demonstration unit free of charge
and without obligation. Do contact us for the further
clarification and consultation. It will indeed be
our pleasure to assist you in your projects.
